If you own a commercial business, and you are a large consumer of HVAC cooling, you need to check out the SmartMist system. This system is ideal for grocery stores, data centers, hospitals, and more! Save 10-30% on your electrical usage, with the fastest ROI in the industry!


The system uses a low flow / medium pressure mist that is controlled by a series of automated controls integrated into our Smart Pump system. This allows the pre-cooling mist to activate only when needed. When the air conditioner mister is activated, the ultra-fine mist is released into the micro-climate directly in front of the condenser coil. This ?mist zone? creates an instant drop in air temperature of about 30 degrees (even in high humidity conditions), while at the same time dampening the actual coil surface with treated evaporative cooled water.

The combination of both the cooler air and wet coil surface allows for the fastest heat exchange possible. This immediately and substantially lowers the AC unit’s head pressure, amp draw and cycle time, resulting in a reliable 20 to 25 percent reduction in energy use and cost, and in some cases a reduction of over 30 percent.

AC Mister Quick Facts:

  • Reliable Savings of up to 30%
  • Low start up and operating costs
  • Retrofits to any size and style unit
  • ROI measured in months-not years
  • Automated - Smart Pump control system
  • Patented anti-scaling & corrosion technology

TAC Water Treatment Technology


smart-ScaleStop has proven itself in a variety of applications as an alternative to ion exchange softening or other conventional water treatment methods. The maintenance-free characteristics make it especially suited for Foodservice and Commercial applications where equipment maintenance is often overlooked. smart-ScaleStop is a great alternative for residential use, especially in areas with brine discharge restrictions or where brackish water makes it impossible to operate a conventional softener.


  • Extremely efficient - 5 seconds contact time regardless of hardness level. Conventional Ion Exchange resin requires 90 seconds.
  • No salt or other regenerates required.
  • No water waste from backwashing.
  • No brine discharge. Can be used in areas where conventional water softeners are banned.
  • Long lasting media-not consumed by the reactions.
  • Unique "Template Assisted Crystallization" (TAC) technology induces the formation of microscopic calcium crystals which effectively isolate hardness from the water chemistry.
  • No control valve or electricity required.
  • Media operates in upflow condition.